SENSITIVE FABRICS
 |
Pressure sensitive fabric switch, 20 cm x 15 cm, (7.8"x5.9")Knitted
pressure
sensitive fabric made of three
layers. Two layers of stainless steel are separated by one layer of
acrylic fabric. When pressed, the two external layers touch, allowing
current flow. This basic sensitive fabric has a functioning equivalent
to a push button switch. When you press it you close an electrical
circuit.
This fabric is compatible with the Arduino platform, and it can be
connected to an Arduino controller without any additional
hardware. See
how here.
See pictures with colors here. |
|
Sensitive fabric switch 20 cm x 15 cm Euro 16.00 |
|
 |
Pressure sensitive tape switch, 4 cm x 100 cm (1.6" x 39")Knitted pressure sensitive tape made of three layers. Two layers of stainless steel are separated by one layer of acrylic fabric. When pressed, the two external layers touch, allowing current flow. This basic sensitive fabric has a functioning equivalent to a push button switch. When you press it you close an electrical circuit. This fabric is compatible with the Arduino platform, and it can be connected to an Arduino controller without any additional hardware. See how here. See pictures with colors here. Ref: TACRACPS0400 |
|
Sensitive fabric switch 4 cm x 100 cm Euro 15.00 |
|
 |
Double button pressure sensitive switch, 4 cm x 4 cm (1.57" x 1.57")Double
knitted
pressure
sensitive tape for double action. Each sensitive area has a
size of 4 cm x 4 cm (1.57" x 1.57"). These are two separate
buttons that will help you to have two separate commands, i.e. up/down
or left/right. This sensitive fabric has a functioning equivalent
to two push button switches. When you press it you close an electrical
circuit.
This fabric is compatible with the Arduino platform, and it can be
connected to an Arduino controller without any additional
hardware. See how here |
|
Sensitive double switch tape 4 cm x 4 cm Euro 8.00 |
|